GOR200DEU Site Information Form (site log v2.0)
International GNSS Service
See Instructions at:
https://files.igs.org/pub/station/general/sitelog_instr_v2.0.txt
0. Form
Prepared by (full name) : GREF Operator (operator.gref@bkg.bund.de)
Date Prepared : 2024-02-15
Report Type : UPDATE
If Update:
Previous Site Log : gor200deu_20230419.log
Modified/Added Sections : 2, 3.12, 3.13, 8.1.4, 8.1.2, 8.1.1, 8.1.3,
: 8.1.5, 8.2.4, 8.2.2, 8.2.3, 8.2.1, 8.3.5, 8.3.3,
: 8.3.2, 8.3.1, 8.3.4, 13
1. Site Identification of the GNSS Monument
Site Name : Gorleben
Nine Character ID : GOR200DEU
Monument Inscription :
IERS DOMES Number : 14115M002
CDP Number : (A4)
Monument Description : Steelpipe with heat protection
Height of the Monument : 2.5 m
Monument Foundation : 2008
Foundation Depth : (m)
Marker Description : SURVEY MARKER BOLT ON THE PILLAR
Date Installed : 2008-04-15T10:00Z
Geologic Characteristic : (BEDROCK/CLAY/CONGLOMERATE/GRAVEL/SAND/etc)
Bedrock Type : (IGNEOUS/METAMORPHIC/SEDIMENTARY)
Bedrock Condition : (FRESH/JOINTED/WEATHERED)
Fracture Spacing : (0 cm/1-10 cm/11-50 cm/51-200 cm/over 200 cm)
Fault zones nearby : NO
Distance/activity : (multiple lines)
Additional Information : Survey Marker Bolt on a pillar.
: Antenna mounted with a special screw
: adapter on a rivet thread of a circular
: tube of steel, mounted on a concrete foundation
: placed on the ground at the station
: of the Wasser- und Schifffahrtsamt
: Magdeburg, branch Gorleben.
2. Site Location Information
City or Town : Gorleben
State or Province : Niedersachsen
Country or Region : DEU
Tectonic Plate : EURASIAN
Approximate Position (ITRF)
X coordinate (m) : 3767159.900
Y coordinate (m) : 756145.200
Z coordinate (m) : 5073920.100
Latitude (N is +) : +530258.95
Longitude (E is +) : +0112058.58
Elevation (m,ellips.) : 61.7
Additional Information : (multiple lines)
3. GNSS Receiver Information
3.1 Receiver Type : TPS NETG3
Satellite System : GPS+GLO
Serial Number : R8598LJM9DS
Firmware Version : 3.2 Dec,20,2007
Elevation Cutoff Setting : 0 deg
Date Installed : 2008-04-15T12:00Z
Date Removed : 2008-10-15T13:59Z
Temperature Stabiliz. : none
Additional Information : (multiple lines)
3.2 Receiver Type : JPS LEGACY
Satellite System : GPS+GLO
Serial Number : AF0WQJPZSHS
Firmware Version : 2.6.1 JAN,10,2008
Elevation Cutoff Setting : 0 deg
Date Installed : 2008-10-15T14:00Z
Date Removed : 2015-04-14T10:00Z
Temperature Stabiliz. : none
Additional Information : Additional Number
: 235-0374 on the
: type level
3.3 Receiver Type : LEICA GR25
Satellite System : GPS+GLO+GAL+SBAS
Serial Number : 1831170
Firmware Version : 3.11.1639
Elevation Cutoff Setting : 0 deg
Date Installed : 2015-04-14T10:00Z
Date Removed : 2016-05-05T12:00Z
Temperature Stabiliz. : none
Additional Information : ME serial number BDU14060278
3.4 Receiver Type : LEICA GR25
Satellite System : GPS+GLO+GAL+SBAS
Serial Number : 1831170
Firmware Version : 3.22.1818
Elevation Cutoff Setting : 0 deg
Date Installed : 2016-05-05T12:00Z
Date Removed : 2016-07-13T07:30Z
Temperature Stabiliz. : none
Additional Information : ME serial number BDU14060278
3.5 Receiver Type : LEICA GR25
Satellite System : GPS+GLO+GAL+SBAS
Serial Number : 1831170
Firmware Version : 4.00.335
Elevation Cutoff Setting : 0 deg
Date Installed : 2016-07-13T07:30Z
Date Removed : 2016-12-27T11:30Z
Temperature Stabiliz. : none
Additional Information : ME serial number BDU14060278
3.6 Receiver Type : LEICA GR25
Satellite System : GPS+GLO+GAL+BDS+SBAS
Serial Number : 1831170
Firmware Version : 4.02.386
Elevation Cutoff Setting : 0 deg
Date Installed : 2016-12-27T11:30Z
Date Removed : 2017-04-05T09:10Z
Temperature Stabiliz. : none
Additional Information : ME serial number BDU14060278
3.7 Receiver Type : LEICA GR25
Satellite System : GPS+GLO+GAL+BDS+SBAS
Serial Number : 1831170
Firmware Version : 4.11.606
Elevation Cutoff Setting : 0 deg
Date Installed : 2017-04-05T09:10Z
Date Removed : 2019-03-26T12:25Z
Temperature Stabiliz. : none
Additional Information : ME serial number BDU14060278
3.8 Receiver Type : LEICA GR50
Satellite System : GPS+GLO+GAL+BDS+SBAS
Serial Number : 1830200
Firmware Version : 4.31.101
Elevation Cutoff Setting : 0 deg
Date Installed : 2019-03-26T12:25Z
Date Removed : 2021-05-31T12:25Z
Temperature Stabiliz. : none
Additional Information : ME serial number BMGZ16510099T
3.9 Receiver Type : LEICA GR50
Satellite System : GPS+GLO+GAL+BDS+SBAS
Serial Number : 1830200
Firmware Version : 4.50/7.710
Elevation Cutoff Setting : 0 deg
Date Installed : 2021-05-31T12:25Z
Date Removed : 2022-03-03T07:23Z
Temperature Stabiliz. : none
Additional Information : ME serial number BMGZ16510099T
3.10 Receiver Type : LEICA GR50
Satellite System : GPS+GLO+GAL+BDS+SBAS
Serial Number : 1830200
Firmware Version : 4.52/7.711
Elevation Cutoff Setting : 0 deg
Date Installed : 2022-03-03T07:23Z
Date Removed : 2022-09-05T12:18Z
Temperature Stabiliz. : none
Additional Information : ME serial number BMGZ16510099T
3.11 Receiver Type : LEICA GR50
Satellite System : GPS+GLO+GAL+BDS+SBAS
Serial Number : 1830200
Firmware Version : 4.60/7.811
Elevation Cutoff Setting : 0 deg
Date Installed : 2022-09-05T12:18Z
Date Removed : 2023-02-09T09:30Z
Temperature Stabiliz. : none
Additional Information : ME serial number BMGZ16510099T
3.12 Receiver Type : JAVAD TRE_3 DELTA
Satellite System : GPS+GLO+GAL+BDS+SBAS
Serial Number : 02904
Firmware Version : 4.1.06-221128
Elevation Cutoff Setting : 0 deg
Date Installed : 2023-02-09T09:30Z
Date Removed : 2024-02-15T09:13Z
Temperature Stabiliz. : none
Additional Information : Board Id
: 1QCT38OVDDOOM0QYWF011R6OE8
3.13 Receiver Type : JAVAD TRE_3 DELTA
Satellite System : GPS+GLO+GAL+BDS+SBAS
Serial Number : 02904
Firmware Version : 4.3.00-231129
Elevation Cutoff Setting : 0 deg
Date Installed : 2024-02-15T09:13Z
Date Removed : CCYY-MM-DDThh:mmZ
Temperature Stabiliz. : none
Additional Information : Board Id
: 1QCT38OVDDOOM0QYWF011R6OE8
3.x Receiver Type : (A20, from rcvr_ant.tab; see instructions)
Satellite System : (GPS+GLO+GAL+BDS+QZSS+IRNSS+SBAS)
Serial Number : (A20, but note the first A5 is used in SINEX)
Firmware Version : (A11)
Elevation Cutoff Setting : (deg)
Date Installed : (CCYY-MM-DDThh:mmZ)
Date Removed : (CCYY-MM-DDThh:mmZ)
Temperature Stabiliz. : (none or tolerance in degrees C)
Additional Information : (multiple lines)
4. GNSS Antenna Information
4.1 Antenna Type : TPSCR3_GGD CONE
Serial Number : 217-0241
Antenna Reference Point : BPA
Marker->ARP Up Ecc. (m) : 0.0450
Marker->ARP North Ecc(m) : 0.0000
Marker->ARP East Ecc(m) : 0.0000
Alignment from True N : 0 deg
Antenna Radome Type : CONE
Radome Serial Number :
Antenna Cable Type : Ecoflex 15
Antenna Cable Length : 60 m
Date Installed : 2008-04-15T12:00Z
Date Removed : 2012-09-12T14:00Z
Additional Information : Antenna individual calibrated
: absolute by GEO++
4.2 Antenna Type : LEIAR25.R4 LEIT
Serial Number : 725057
Antenna Reference Point : BPA
Marker->ARP Up Ecc. (m) : 0.0450
Marker->ARP North Ecc(m) : 0.0000
Marker->ARP East Ecc(m) : 0.0000
Alignment from True N : 0 deg
Antenna Radome Type : LEIT
Radome Serial Number :
Antenna Cable Type : Ecoflex 15
Antenna Cable Length : 60 m
Date Installed : 2012-09-12T14:30Z
Date Removed : 2019-03-26T12:25Z
Additional Information : Antenna individual calibrated
: absolute by GEO++
4.3 Antenna Type : LEIAR25.R3 LEIT
Serial Number : 08500024
Antenna Reference Point : BPA
Marker->ARP Up Ecc. (m) : 0.0450
Marker->ARP North Ecc(m) : 0.0000
Marker->ARP East Ecc(m) : 0.0000
Alignment from True N : 0 deg
Antenna Radome Type : LEIT
Radome Serial Number :
Antenna Cable Type : Ecoflex 15
Antenna Cable Length : 60 m
Date Installed : 2019-03-26T12:25Z
Date Removed : 2021-09-13T10:07Z
Additional Information : Antenna individual calibrated absolutely by
: : Uni Bonn - CHAMBER 2019-01-18
4.4 Antenna Type : LEIAR25.R3 LEIT
Serial Number : 10170023
Antenna Reference Point : BPA
Marker->ARP Up Ecc. (m) : 0.0450
Marker->ARP North Ecc(m) : 0.0000
Marker->ARP East Ecc(m) : 0.0000
Alignment from True N : 0 deg
Antenna Radome Type : LEIT
Radome Serial Number :
Antenna Cable Type : Ecoflex 15
Antenna Cable Length : 60 m
Date Installed : 2021-09-13T10:07Z
Date Removed : CCYY-MM-DDThh:mmZ
Additional Information : Antenna individual calibrated absolutely by
: : GEO++ - ROBOT 2010-07-05
: : UNI BONN - CHAMBER 2010-09-07
: : UNI BONN - CHAMBER 2019-09-23
: : Senatsverwaltung Berlin - ROBOT 2020-02-06
4.x Antenna Type : (A20, from rcvr_ant.tab; see instructions)
Serial Number : (A*, but note the first A5 is used in SINEX)
Antenna Reference Point : (BPA/BCR/XXX from "antenna.gra"; see instr.)
Marker->ARP Up Ecc. (m) : (F8.4)
Marker->ARP North Ecc(m) : (F8.4)
Marker->ARP East Ecc(m) : (F8.4)
Alignment from True N : (deg; + is clockwise/east)
Antenna Radome Type : (A4 from rcvr_ant.tab; see instructions)
Radome Serial Number :
Antenna Cable Type : (vendor & type number)
Antenna Cable Length : (m)
Date Installed : (CCYY-MM-DDThh:mmZ)
Date Removed : (CCYY-MM-DDThh:mmZ)
Additional Information : (multiple lines)
5. Surveyed Local Ties
5.x Tied Marker Name :
Tied Marker Usage : (SLR/VLBI/LOCAL CONTROL/FOOTPRINT/etc)
Tied Marker CDP Number : (A4)
Tied Marker DOMES Number : (A9)
Differential Components from GNSS Marker to the tied monument (ITRS)
dx (m) : (m)
dy (m) : (m)
dz (m) : (m)
Accuracy (mm) : (mm)
Survey method : (GPS CAMPAIGN/TRILATERATION/TRIANGULATION/etc)
Date Measured : (CCYY-MM-DDThh:mmZ)
Additional Information : (multiple lines)
6. Frequency Standard
6.1 Standard Type : INTERNAL
Input Frequency : (if external)
Effective Dates : 2008-04-15/CCYY-MM-DD
Notes : (multiple lines)
6.x Standard Type : (INTERNAL or EXTERNAL H-MASER/CESIUM/etc)
Input Frequency : (if external)
Effective Dates : (CCYY-MM-DD/CCYY-MM-DD)
Notes : (multiple lines)
7. Collocation Information
7.1 Instrumentation Type : GNSS GOR201DEU
Status : PERMANENT
Effective Dates : 2020-02-28/CCYY-MM-DD
Notes : Secondary Receiver at the same antenna.
: More information and data available on
: request.
7.x Instrumentation Type : (GPS/GLONASS/DORIS/PRARE/SLR/VLBI/TIME/etc)
Status : (PERMANENT/MOBILE)
Effective Dates : (CCYY-MM-DD/CCYY-MM-DD)
Notes : (multiple lines)
8. Meteorological Instrumentation
8.1.1 Humidity Sensor Model : HMP45A-P
Manufacturer : Vaisala
Serial Number : W5040008
Data Sampling Interval : 10 sec
Accuracy (% rel h) : 1 % rel h
Aspiration : CAPACITIVY THIN FILM POLYMER
Height Diff to Ant : -1 m
Calibration date : 2008-04-09
Effective Dates : 2008-10-15/2011-06-29
Notes : The humidity sensor is 1.0 m
: below the antenna.
8.1.2 Humidity Sensor Model : HMP45A-P
Manufacturer : Vaisala
Serial Number : A4940004
Data Sampling Interval : 10 sec
Accuracy (% rel h) : 1 % rel h
Aspiration : CAPACITIVY THIN FILM POLYMER
Height Diff to Ant : -1 m
Calibration date : 2010-10-23
Effective Dates : 2011-06-29/2019-03-26
Notes : The humidity sensor is 1.0 m
: below the antenna.
8.1.3 Humidity Sensor Model : HMP45A-P
Manufacturer : Vaisala
Serial Number : X2930003
Data Sampling Interval : 10 sec
Accuracy (% rel h) : 1 % rel h
Aspiration : CAPACITIVY THIN FILM POLYMER
Height Diff to Ant : -1 m
Calibration date : 2017-05-03
Effective Dates : 2019-03-26/2021-09-14
Notes : The humidity sensor is 1.0 m
: below the antenna.
8.1.4 Humidity Sensor Model : WXTPTU
Manufacturer : Vaisala
Serial Number : P2950033
Data Sampling Interval : 10 sec
Accuracy (% rel h) : 3 % rel h
Aspiration : NATURAL
Height Diff to Ant : -1.3 m
Calibration date : 2018-07-25
Effective Dates : 2021-09-14/2022-09-20
Notes : Vaisala WXT530 SN: P3710985
: Humidity Sensor is 1.3 m below the antenna
: capacitive thin film polymer HUMICAP 180 sensor
8.1.5 Humidity Sensor Model : WXTPTU
Manufacturer : Vaisala
Serial Number : P3240147
Data Sampling Interval : 10 sec
Accuracy (% rel h) : 3 % rel h
Aspiration : NATURAL
Height Diff to Ant : -1.3 m
Calibration date : 2018-08-13
Effective Dates : 2022-09-20/CCYY-MM-DD
Notes : Vaisala WXT530 SN: P3710983
: Humidity Sensor is 1.3 m below the antenna
: capacitive thin film polymer HUMICAP 180 sensor
8.1.x Humidity Sensor Model :
Manufacturer :
Serial Number :
Data Sampling Interval : (sec)
Accuracy (% rel h) : (% rel h)
Aspiration : (UNASPIRATED/NATURAL/FAN/etc)
Height Diff to Ant : (m)
Calibration date : (CCYY-MM-DD)
Effective Dates : (CCYY-MM-DD/CCYY-MM-DD)
Notes : (multiple lines)
8.2.1 Pressure Sensor Model : PTU200
Manufacturer : Vaisala Oyi
Serial Number : X2930004
Data Sampling Interval : 10 sec
Accuracy : 0.1 hPa
Height Diff to Ant : -1 m
Calibration date : 2002-07-22
Effective Dates : 2008-10-15/2019-03-26
Notes : The pressure Sensor is
: 1.0 m below the antenna.
8.2.2 Pressure Sensor Model : PTU200
Manufacturer : Vaisala
Serial Number : A4930001
Data Sampling Interval : 10 sec
Accuracy : 0.1 hPa
Height Diff to Ant : -1 m
Calibration date : 2017-10-13
Effective Dates : 2019-03-26/2021-09-14
Notes : The pressure Sensor is
: 1.0 m below the antenna.
8.2.3 Pressure Sensor Model : WXTPTU
Manufacturer : Vaisala
Serial Number : P2950033
Data Sampling Interval : 10 sec
Accuracy : 1 hPa
Height Diff to Ant : -1.3 m
Calibration date : 2018-07-25
Effective Dates : 2021-09-14/2022-09-20
Notes : Vaisala WXT530 SN: P3710985
: Pressure Sensor is 1.3 m below the antenna
: capacitive silicon BAROCAP sensor
8.2.4 Pressure Sensor Model : WXTPTU
Manufacturer : Vaisala
Serial Number : P3240147
Data Sampling Interval : 10 sec
Accuracy : 1 hPa
Height Diff to Ant : -1.3 m
Calibration date : 2018-08-13
Effective Dates : 2022-09-20/CCYY-MM-DD
Notes : Vaisala WXT530 SN: P3710983
: Pressure Sensor is 1.3 m below the antenna
: capacitive silicon BAROCAP sensor
8.2.x Pressure Sensor Model :
Manufacturer :
Serial Number :
Data Sampling Interval : (sec)
Accuracy : (hPa)
Height Diff to Ant : (m)
Calibration date : (CCYY-MM-DD)
Effective Dates : (CCYY-MM-DD/CCYY-MM-DD)
Notes : (multiple lines)
8.3.1 Temp. Sensor Model : HMP45A-P
Manufacturer : Vaisala Oyi
Serial Number : W5040008
Data Sampling Interval : 10 sec
Accuracy : 0.2 deg C
Aspiration : RESISTIVE PLATINUM PROBE
Height Diff to Ant : -1 m
Calibration date : 2008-04-09
Effective Dates : 2008-10-15/2011-06-29
Notes : The temperature sensor is
: 1.0 m below the antenna.
8.3.2 Temp. Sensor Model : HMP45A-P
Manufacturer : Vaisala Oyi
Serial Number : A4940004
Data Sampling Interval : 10 sec
Accuracy : 0.2 deg C
Aspiration : RESISTIVE PLATINUM PROBE
Height Diff to Ant : -1 m
Calibration date : 2010-10-23
Effective Dates : 2011-06-29/2019-03-26
Notes : The temperature sensor is
: 1.0 m below the antenna.
8.3.3 Temp. Sensor Model : HMP45A-P
Manufacturer : Vaisala
Serial Number : X2930003
Data Sampling Interval : 10 sec
Accuracy : 0.2 deg C
Aspiration : RESISTIVE PLATINUM PROBE
Height Diff to Ant : -1 m
Calibration date : 2017-05-03
Effective Dates : 2019-03-26/2021-09-14
Notes : The temperature sensor is
: 1.0 m below the antenna.
8.3.4 Temp. Sensor Model : WXTPTU
Manufacturer : Vaisala
Serial Number : P2950033
Data Sampling Interval : 10 sec
Accuracy : 0.3 deg C
Aspiration : NATURAL
Height Diff to Ant : -1.3 m
Calibration date : 2018-07-25
Effective Dates : 2021-09-14/2022-09-20
Notes : Vaisala WXT530 SN: P3710985
: Temperature Sensor is 1.3 m below the antenna
: capacitive ceramic THERMOCAP sensor
8.3.5 Temp. Sensor Model : WXTPTU
Manufacturer : Vaisala
Serial Number : P3240147
Data Sampling Interval : 10 sec
Accuracy : 0.3 deg C
Aspiration : NATURAL
Height Diff to Ant : -1.3 m
Calibration date : 2018-07-25
Effective Dates : 2022-09-20/CCYY-MM-DD
Notes : Vaisala WXT530 SN: P3710983
: Temperature Sensor is 1.3 m below the antenna
: capacitive ceramic THERMOCAP sensor
8.3.x Temp. Sensor Model :
Manufacturer :
Serial Number :
Data Sampling Interval : (sec)
Accuracy : (deg C)
Aspiration : (UNASPIRATED/NATURAL/FAN/etc)
Height Diff to Ant : (m)
Calibration date : (CCYY-MM-DD)
Effective Dates : (CCYY-MM-DD/CCYY-MM-DD)
Notes : (multiple lines)
8.4.x Water Vapor Radiometer :
Manufacturer :
Serial Number :
Distance to Antenna : (m)
Height Diff to Ant : (m)
Calibration date : (CCYY-MM-DD)
Effective Dates : (CCYY-MM-DD/CCYY-MM-DD)
Notes : (multiple lines)
8.5.1 Other Instrumentation : Wind Azimut
: Wind Sensor Model WXT530
: Manufacturer Vaisala
: Serial Number Wind Sensor P3533430
: Data Sampling Interval 10 sec
: Accuracy 3 deg
: Height Diff to Ant -1.3 m
: Test date 2018-07-25
: Effective Dates 2021-09-14/2022-09-20
: Vaisala WXT530 SN: P3710985
: Notes Wind Sensor is at the height of the
: antenna
: Notes ultrasonic WINDCAP sensor
8.5.2 Other Instrumentation : Wind Speed
: Wind Sensor Model WXT530
: Manufacturer Vaisala
: Serial Number Wind Sensor P3533430
: Data Sampling Interval 10 sec
: Accuracy
: measurement values 0..35 m/s 0.3 m/s or 3%
: measurement values 36..60 m/s 5%
: Height Diff to Ant -1.3 m
: Test date 2018-07-25
: Effective Dates 2021-09-14/2022-09-20
: Vaisala WXT530 SN: P3710985
: Notes Wind Sensor is at the height of the
: antenna
: Notes ultrasonic WINDCAP sensor
8.5.3 Other Instrumentation : Rain Increment
: Rain Sensor Model WXT530
: Manufacturer Vaisala
: Serial Number Rain Sensor P3533430
: Data Sampling Interval 10 sec
: Accuracy 5 %
: Height Diff to Ant -1.3 m
: Test date 2018-07-25
: Effective Dates 2021-09-14/2022-09-20
: Vaisala WXT530 SN: P3710985
: Notes Rain Sensor is at the height of the
: antenna
: Notes piezoelectrical RAINCAP sensor
8.5.4 Other Instrumentation : Hail Indicator
: Hail Sensor Model WXT530
: Manufacturer Vaisala
: Serial Number Hail Sensor P3533430
: Data Sampling Interval 10 sec
: Accuracy 5 %
: Height Diff to Ant -1.3 m
: Test date 2018-07-25
: Effective Dates 2021-09-14/2022-09-20
: Vaisala WXT530 SN: P3710985
: Notes Hail Sensor is at the height of the
: antenna
: Notes piezoelectrical RAINCAP sensor
8.5.5 Other Instrumentation : Wind Azimut
: Wind Sensor Model WXT530
: Manufacturer Vaisala
: Serial Number Wind Sensor P3553023
: Data Sampling Interval 10 sec
: Accuracy 3 deg
: Height Diff to Ant -1.3 m
: Test date 2018-09-10
: Effective Dates 2022-09-20/CCYY-MM-DD
: Vaisala WXT530 SN: P3710983
: Notes Wind Sensor is at the height of the
: antenna
: Notes ultrasonic WINDCAP sensor
8.5.6 Other Instrumentation : Wind Speed
: Wind Sensor Model WXT530
: Manufacturer Vaisala
: Serial Number Wind Sensor P3553023
: Data Sampling Interval 10 sec
: Accuracy
: measurement values 0..35 m/s 0.3 m/s or 3%
: measurement values 36..60 m/s 5%
: Height Diff to Ant -1.3 m
: Test date 2018-09-10
: Effective Dates 2022-09-20/CCYY-MM-DD
: Vaisala WXT530 SN: P3710983
: Notes Wind Sensor is at the height of the
: antenna
: Notes ultrasonic WINDCAP sensor
8.5.7 Other Instrumentation : Rain Increment
: Rain Sensor Model WXT530
: Manufacturer Vaisala
: Serial Number Rain Sensor P3553023
: Data Sampling Interval 10 sec
: Accuracy 5 %
: Height Diff to Ant -1.3 m
: Test date 2018-09-10
: Effective Dates 2022-09-20/CCYY-MM-DD
: Vaisala WXT530 SN: P3710983
: Notes Rain Sensor is at the height of the
: antenna
: Notes piezoelectrical RAINCAP sensor
8.5.8 Other Instrumentation : Hail Indicator
: Hail Sensor Model WXT530
: Manufacturer Vaisala
: Serial Number Hail Sensor P3553023
: Data Sampling Interval 10 sec
: Accuracy 5 %
: Height Diff to Ant -1.3 m
: Test date 2018-09-10
: Effective Dates 2022-09-20/CCYY-MM-DD
: Vaisala WXT530 SN: P3710983
: Notes Hail Sensor is at the height of the
: antenna
: Notes piezoelectrical RAINCAP sensor
8.5.x Other Instrumentation : (multiple lines)
9. Local Ongoing Conditions Possibly Affecting Computed Position
9.1.x Radio Interferences : (TV/CELL PHONE ANTENNA/RADAR/etc)
Observed Degradations : (SN RATIO/DATA GAPS/etc)
Effective Dates : (CCYY-MM-DD/CCYY-MM-DD)
Additional Information : (multiple lines)
9.2.x Multipath Sources : (METAL ROOF/DOME/VLBI ANTENNA/etc)
Effective Dates : (CCYY-MM-DD/CCYY-MM-DD)
Additional Information : (multiple lines)
9.3.x Signal Obstructions : (TREES/BUILDINGS/etc)
Effective Dates : (CCYY-MM-DD/CCYY-MM-DD)
Additional Information : (multiple lines)
10. Local Episodic Effects Possibly Affecting Data Quality
10.x Date : (CCYY-MM-DD/CCYY-MM-DD)
Event : (TREE CLEARING/CONSTRUCTION/etc)
11. On-Site, Point of Contact Agency Information
Agency : Bundesamt fuer Kartographie und Geodaesie
: Department of Geodaesie
Preferred Abbreviation : BKG
Mailing Address : Richard-Strauss-Allee 11
: D-60598 Frankfurt a.M.
: Germany
Primary Contact
Contact Name : GREF Operator
Telephone (primary) : +49 341 5634410
Telephone (secondary) : +49 341 5634432
Fax : +49 341 5634415
E-mail : operator.gref@bkg.bund.de
Secondary Contact
Contact Name : BKG GNSS Data Center
Telephone (primary) : +49 69 6333274
Telephone (secondary) : +49 69 63331
Fax : +49 69 6333425
E-mail : bkg-gdc@bkg.bund.de
Additional Information : (multiple lines)
12. Responsible Agency (if different from 11.)
Agency : (multiple lines)
Preferred Abbreviation : (A10)
Mailing Address : (multiple lines)
Primary Contact
Contact Name :
Telephone (primary) :
Telephone (secondary) :
Fax :
E-mail :
Secondary Contact
Contact Name :
Telephone (primary) :
Telephone (secondary) :
Fax :
E-mail :
Additional Information : (multiple lines)
13. More Information
Primary Data Center : BKG
Secondary Data Center : BEV
URL for More Information : https://gref.bkg.bund.de
Hardcopy on File
Site Map : (Y or URL)
Site Diagram : (Y or URL)
Horizon Mask : (Y or URL)
Monument Description : (Y or URL)
Site Pictures : Y
Additional Information : (multiple lines)
Antenna Graphics with Dimensions
TPSCR3_GGD
---------
/ + \ <-- 0.104 = L2
| + | <-- 0.081 = L1
+--------------------------------------------------+ <-- 0.071 = TCR
| |
| |
| |
| |
+-----------------+-------------+------------------+ <-- 0.003 = BCR
+-----x-----+ <-- 0.000 BPA=ARP
<-- 0.326 -->
LEIAR25.R4
+-------+ <-- 0.1995
/ \
+---+-------------+---+ <-- 0.1606 TCR
| |
|---------------------------|
|---------------------------------|
|---------------------------------------|
+---------------------------------------------+
| |
| |
+-+---------------------------------------------+-+
+-----------------+-------------+-----------------+ <-- 0.0320 BCR
| |
| |
+------x------+ <-- 0.0000 BPA=ARP
<-- 0.3802 -->
ARP: Antenna Reference Point
L1 : L1 Phase Center L2 : L2 Phase Center
TCR: Top of Chokering BCR: Bottom of Chokering
TGP: Top of Ground Plane BGP: Bottom of Ground Plane
TPA: Top of Preamplifier BPA: Bottom of Preamplifier
TOP: Top of Pole BOP: Bottom of Pole
All dimensions are in meters.
